32 thoughts on “TTSH Synthesizer V4 (ARP 2600 Clone) Now Available To Pre-Order”

1. Love it, can’t afford it!

2. The $3499 for an assembled tested unit in the case is an extremely good price. That’s in line with the cost of a full restoration and rebuild.

   And the $1499 for a full kit with everything is a superb price.

   1. Terrible pricing!

      1. Terrible comment!

3. This looks cool, but there’s no official demos. That’s a lot of money to spend without watching a demo.

   Anybody got good demo video links that they can share?

   Also, is this project doable for someone with experience putting together some synth modules, or is it more engineer level complicated?

   1. Assuming it’s a circuit clone of the original design, it’s a huge amount of soldering. Compare to a 10,000 piece jigsaw puzzle or the $800 Millennium Falcon Lego set.

      If you use sockets for the ICs then you eliminate much of the risk of damaging parts. To calibrate it you really are going to need an oscilloscope.

      Doable for someone with past experience with synth kits. For those uncertain the fully put together price is really not bad.

   2. There are suggested videos right below the article that link to a time lapsed build and videos containing sound demos.

      These are very well regarded among synth builders.

      1. those are from patch I ..all sound ttsh made during build,calibration process and first usage 🙂
         finally it was awesome to build, and gives my a special relationship to my synth. better than just buy one finished. at least for me. but it was a lot of work and took me a month in sum but i don’t see it really at work, soldering its more relaxing

         https://www.youtube.com/watch?v=xO0EcyeUzeg

   3. how about this one: https://www.youtube.com/watch?v=Y9w5nLGnW24

4. I wonder if Behringer is coming out with a clone of the 2600?

5. why not just wait for the uli 2600? It’s already been leaked by Behringer. I have played most of their clones and they are incredible, especially the Odyssey and 808. Hate to say it but the Clone Wars are over, the Empire has won.

   1. Why exactly would you wait for a big company to release their synth for cheap if you already have it up your sleeves and this might be the last option to sell it? The Empire is slow and has promised soooo much yet released so few! Also: why buy it pre-built if you have loads and loads of fun building it yourself? I really don’t get it!

   2. Due to their unethical behavior, particularly their using the Chinese state’s power against journalists and labor organizers, and their misuse of the US courts against their perceived enemies, not only will I never buy anything from Behringer or any of Music Group’s other companies, but I will not collaborate with anyone who uses their gear, nor recommend their music. You can support power mad sociopathic Nazi type thinking individuals like Uli, but I won’t work or associate with you.

      1. @Rabid Bat: You realise that most of the things you use contain components made in China, if they are not entirely produced over there? So what´s the point?

      2. I’m aware of many of the controversies surrounding Music Group, but could you explain “using the Chinese state’s power against journalists and labor organizers”?

         Not challenging you here, I just don’t really understand what you’re referring to, i.e. a specific incident or China-based manufacturing in general.

         1. The new Behringer factory had serious problems with it and employees were getting sick. Labor organizers were persecuted. A journalist reported on it ( https://www.midifan.com/modulenews-detailview-28353.htm ) and Behringer worked with the Chinese authorities to silence him. ( https://www.midifan.com/modulenews-detailview-29955.htm )

            1. Links are in Chinese.

               Translation?

   3. Behringer released images today of their 2600 today. My guess they will be showing it off during the holidays. Behringer rebels might as well surrender now and join the darkside. Their synths sound excellent and they are basically giving them away for nothing, I can now afford to buy back all my vintage synths I sold and also buy the ones I could not afford like the 2600!

   4. Why not just wait? Because most people are smart enough to avoid anything with a Behringer logo. Vintage gear from the 1970s is still working. Good luck getting your Uli 2600 repaired in the year 2059, most likely they will all be sitting in a landfill.

6. The only synth I buy is the one that costs $299

7. Right on Rabid Bat! The issue of the Uighers can no longer be ignored by people looking for cheap goods. Stand up for what is right. Any society that will put 1 million people in a concentration camp, is one no company should help.

8. This is my happy place where people talk about synths. Please don’t spoil my happy place with politics.

   1. Or perhaps the legions of Behringer marketing alias accounts could leave some of the threads here alone.

   2. This is politics?

      Really?

      Maybe you need to get out more.

   3. I think you are confusing “politics” with “reality” – synthesizers and drum machines aren’t created with fairy dust and we should all seek more, not less, information about how the world works.

9. Uli just posted pics of his Berhinger 2600 clone on Facebook. could be game over for this awesome project.

   1. Uli teases a lot more than he delivers.

      He announced that he was doing a 2600 two years ago, along with an Octave CAT clone, MS-20 clone, VCS3, LinnDrum clone, etc:

      https://www.synthtopia.com/content/2017/12/13/behringer-teases-arp-2600-wasp-synthi-clones/

      Best case scenario, they release this in a couple of years. This TTSH batch will be sold out and built before Behringer can get their act together on a clone.

10. Lusted after a 2600 forever.Took the plunge and made the deposit

11. I will skip this one and waiting for the $699 Behringer version. Machine produced will be more reliable than soldered by hand anyway.

    1. Mass-produced SMT PCBs are designed to be disposable, and are much harder to repair for typical DIY’er.

       If you build something yourself, though, you’ll be able to repair it easily, if anything ever should go wrong.

12. Understand the reasons on both
    sides but like the idea of supporting this obvious labor of love

13. Really glad to see SynthCube stepping up to keep this project alive. I have avoided the TTSH in the past due to all the kludges that had to be made but it seems that this version fixes all the problems.