x0xi0 is now offering DIY kits for Adafruit x0xb0x mods.
The x0xb0x is an open source Roland TB-303 clone. The kits are complete solutions to modifying the x0xb0x.
They include all parts necessary to complete the installation, including PCB’s, panels, electrical components, & hardware. The kits use only high quality components from manufacturers such as Alpha, Alps, Bourns, E-Switch, NKK, & Sifam.
The kits do not include the x0xb0x itself, so a x0xb0x is needed as well, either an already-built unit or an unassembled kit.
There are currently three standard x0xi0 kits available:
- x0xi0 Full Kit – The full kit adds features to the top control surface and the rear panel. The main parts of the kit are two additional PCB’s, one that goes above the x0xb0x mainboard and one that goes above the x0xb0x I/O board. Once the PCB’s are stuffed they are mounted using the included hardware and connected to the x0xb0x with wires as described in the install manual. The kit also includes a new rear panel with overlay and a 3-color anodized aluminum top panel, as well as new knobs for the exiting controls.
- x0xi0 I/O & Overdrive Kit – The I/O kit adds audio and control voltage inputs & outputs to the rear panel. It also add a complete overdrive & distortion circuit. The main part of the I/O kit is a PCB that goes above the x0xb0x I/O board. The new x0xi0 PCB and stock x0xb0x PCB are mounted to a new rear panel.
- x0xi0 Full Upgrade Kit – The upgrade kit is for those that have installed the I/O & Overdrive and want to upgrade to the Full kit. It includes all the remaining parts to add the top panel mods.
Pricing:
- x0xi0 Full Kit $480
- x0xi0 I/O & Overdrive Kit $140
- x0xi0 ull Upgrade Kit $350 $9.95
- custom x0xb0x Mainboard and I/O Board $80
See the x0xi0 site for details.
Full Kit
New Controls
- VCO1 Level Control
- VCO2 Level Control
- VCO2 Course Tune Control
- VCO2 Fine Tune Control
- VCO2 Waveform Switch
- VCO Sync Switch
- VCO Xmod Depth Control
- VCA Xmod Mode Switch
- Noise Source Level Control
- Filter Overdrive Switch
- ENV2 Attack Control
- ENV2 Decay/Release Control
- ENV2 Decay/Release select Switch
- ENV2 to VCF Depth Control
- ENV2 to VCO/VCA select Switch
- ENV2 to VCO/VCA Depth Control
- ENV2 Shape Switch (normal/inverted)
- ENV2 Trigger Source Switch (Gate, Accent)
- ENV2 Alternate Trigger Source Switch (non-Accent, Slide)
- ENV2 to VCO2 On/Off Switch (on rear panel)
- VCO2 to Filter Mod Depth Control
- VCA Attack Control
- VCA Decay Control
- VCA Sustain Control
- VCA Release Control
- Accent Decay Control
- Filter Tracking Control
- Slide Time Control
- Hi Resonance Switch
- VCF Overdrive Switch
- Gate On Switch Envelope Trigger Button
- Cutoff High Range Switch
- Overdrive On/Off Switch
- Overdrive Amount Switch
- Overdrive Tone
- Overdrive Low Freq Switch
- Overdrive Type Switch
- Power Switch
New Inputs/Outputs
- Gate In
- CV In
- VCO2 CV In (optional)
- Accent In
- Slide In
- Accent Out
- Filter Mod CV In
- Accent Sweep CV Out
- VCO Out
- VCF In
- VCF Out
- VCA In
- VCO Freq Mod In
New Indicators:
- Gate On LED
- ENV2 LED
- Accent Decay LED
- Env Decay LED
- Hi Resonance LED
- Cutoff Hi Range LED
Other Features
- Extended Bass response
- Extended VCF Range
- Extended Env Mod Range
I/O & Overdrive Kit
New Controls
- Cutoff High Range Switch
- Overdrive On/Off Switch
- Overdrive Amount Switch
- Overdrive Tone
- Overdrive Low Freq Switch
- Overdrive Type Switch
New Inputs/Outputs
- Gate In
- CV In
- VCO2 CV In (optional)
- Accent In
- Slide In
- Accent Out
- Filter Mod CV In
- Accent Sweep CV Out
- VCO Out
- VCF In
- VCF Out
- VCA In
- VCO Freq Mod In
Other Features
- Extended Bass response
- Extended VCF Range
- Extended Env Mod Range
via Matrixsynth
