Sur-Audio Lab Intros COS and VOID Synthesizers For SonicCore Scope Systems

Sur-Audio Lab Intros COS and VOID Synthesizers For SonicCore Scope SystemsSur-Audio Lab, a new 3rd party developer for the Scope system, has announced two new synthesizers that take advantage of the unique sound quality and architecture of the Scope system.

VOID Features:

  • Voices: 16 max (depends on the DSP’s and patch complexity)
  • Sound generators: 2 main oscillator featuring 6 wave types and 2 modes each to choose from: Pulse Sync – Pulse width, Saw sync – saw, Waldorf oscillator, sine sync – sine shaped, noise filtered – noise comb filtered, 2 sines added, 2 sines fm ‘ed.
  • Oscillator modulation section: Filter FM, Warp shaping, a distorted Ring modulation type, Frequency modulation, Phase Modulation, Ring Modulation. Envelope generators: 2 ADSR envelopes
  • LFO’s|: 3 multi-wave lfo’s with rate, delay, amount, fade-in, fade-out, 6 waves to choose (sin-square-saw up-saw down-triangle-random), key-retrigger, offset, phase, plus special clock sync modulation
  • Filters: LP 12-24db/octave, HP 12-24db/octave, BP 12-24db/octave, Band Regect, Juno filter (12db LP followed by 12db HP), LP Vintage 24db, Lowpass/bandpass parallel config, Lowpass/highpass parallel config, Highpass/Lowpass in series config, 2 bandpass in series, a Comb filter followed by a Flip n’ Clip shaper, a Comb filter
  • Filter saturation: Soft Sat, Bit reduction, Sample rate decimator, 6db lowpass, 6db highpass, Warp shaper, Squish shaper
  • Effects: Delay, Reverb, Flanger, Chorus
  • Distortion: Fat Sat, Distortion, S/r reduction, 6db Lowpass, 6db Highpass, Warp shaper, Squish shaper
  • Others: Audio input for Lfo sync purposes with pre-recorded Ramps for sample accurate Lfo synced modulations,Envelope follower input Modulation: an 11×35 matrix with 18 parralel modulations plus a 5×7 modulation era.
  • Programs: 194 presets in different categories
  • Requirements: SonicCore (Creamware) Scope platform hardware and software. *
  • Pentium 3-4 for optimal use. Creamware Modular 2 software

COS Features:

  • Voices: 16 max (depends on the DSP’s)
  • Sound generators: 2 main oscillator featuring 6 wave types and 2 modes each to choose from: Triangle sync- Tri shaped, Pulse Sync – Pulse width, Saw sync – saw, sine, sync – sine shaped, noise filtered – noise comb filtered, 2sines added, 2sines fm ‘ed.
  • Morph function: Every pot (totally 50 pots) of the front panel can be modulated in a polyphonic manner and different amounts with four controllers. Available controllers are Velocity (with curve modifier), Keyboard note (with key modifier), Aftertouch, Modulation wheel.
  • Oscillator modulation section: Modulation modes include: Filter FM, Osc distortion, a distorted ring modulation type, Frequency modulation, Phase Modulation, Ring Modulation.
  • Envelope generators: 2 ADSR and an AD envelope
  • LFO’s: 2 multi-wave Lfo’s with rate, 6 waves to choose (sin-square-saw up-saw down-triangle-random), key-retrigger, offset
  • Filters: LP 12-24db/octave, HP 12-24db/octave, BP 12-24db/octave, a 12db filter followed by 12 highpass filter,a Comb filter, an experimental config with a Bandpass filter followed by a shaper, a Lowpass filter followed by a tube simulation, an LP filter followed by a sample rate decimator, an experimental config with a Lowpass filter followed by a shaper, an LP and a BP filter in parallel, 2 bandpass filter in parallel, a lowpass filter and a highpass filter added together
  • Part specific options: Key range assignment, Velocity modifier, Keyboard modifier, Aftertouch modifier
  • Programs: 1 bank *250 presets

Requirements:

  • SonicCore (Creamware) Scope platform hardware and software
  • Pentium 3-4 for optimal use

Leave a Reply

Your email address will not be published. Required fields are marked *