Free Subharmonicon Update Adds New MIDI Features & More

Moog Music today released a free firmware update for the Subharmonicon that adds new MIDI features and more.

Here’s what’s new in Subharmonicon firmware 1.1.0:

  • Sequencer Clock Behavior – Sequencer clock outputs (SEQ 1 CLK and SEQ 2 CLK)  are now in phase with the internal clock. Previously, these outputs were delayed by one clock pulse relative to the internal clock.
  • MIDI Note Transpose – While the sequencers are running, MIDI notes sent to Subharmonicon will transpose the pitch of the sequence that is playing. This allows you to connect a MIDI keyboard such as the Moog Grandmother or Subsequent 25 to Subharmonicon, and use the keyboard to transpose the Subharmonicon sequences live, to follow key changes in your music.
  • Keyboard Note Priority  – Note Priority is a common feature on monophonic synthesizers; since they can only play one note at a time, they need a rule for which note to play when more than one keyboard key is pressed at the same time. You can now use MIDI CC 91 to set Low Note, High Note, or Last Note priority on Subharmonicon in order to determine which notes it will follow when being controlled from a MIDI keyboard.
  • TRIGGER Behavior  – When the Envelope Generator is latched (EG button is blinking), the TRIGGER button and signals received at the TRIGGER input jack are ignored. Previously, if these TRIGGER functions were activated while the EG was latched, the VCF and VCA envelopes would jump to their decay phase and fall to zero, and subsequently not be triggered by the internal sequencer. The EG would have to be unlatched and turned on (EG button solid red) in order to respond to sequence triggers again.

See the Moog site for details.

One thought on “Free Subharmonicon Update Adds New MIDI Features & More

  1. Firmware also fixes sequencer position and parameter settings when subharmonicon is powered off. Previously the settings were not always stored when the instrument was powered off.

Leave a Reply

Your email address will not be published. Required fields are marked *